Description: High polymer water-based emulsion coating with silky texture and high tolerance to washing, including high levels of adhesives, is characterized by rapid dryness and gives high coverage required immediately and easy to apply and suitable for external surfaces, kitchens and bathrooms and is used for long corridors of buildings to be a good reflector of light, which in turn reduces electrical energy consumption Parameters: -Cement and gypsum surfaces, interior and exterior. - Paint if the temperature is below zero Celsius. - Do not apply if the humidity is more than 80%. - Not suitable for iron and plastic surfaces. Technical features: - Finish: Glossy / silky texture. - Washing resistance: resistant. - Color availability: according to color catalog. Dry time: Under natural environmental factors and at a temperature of 25 ° C, the first layer dries within one hour and is ready to paint the second layer after 4 hours. - Dilution: Add part of the clean water to 20% of the paint volume. New surfaces: All surfaces must be dry and free of any materials that may conflict with the adhesives in the materials to be painted on the surface, such as oily materials, and then cover the surface with appropriate parchment paper and remove the dust resulting from the quilting and must also fill the holes by filler materials such as (wall paste) and give the paint layers required to obtain the final shape. Pre-painted surfaces: The surface must be cleaned of the old paint by a quilt with appropriate parchment paper and then treat the cases of moisture, if any, by canceling the cause of moisture, which is problems in the water extensions under the walls, and then treating the old holes by atlas pastes (wall paste) if necessary and obtaining a healthy surface and isolated from moisture thanks to the use of (flax oil) and then painting the required layers of paint to obtain the final shape. Unit Size: -20 liters. -4 liters.